The Janome MyLock 634D with electronic control is the most advanced Janome MyLock serger. It has 2 needles and 2, 3 or 4 thread overlock stitching. The differential feed ratio, which is adjustable from .05 to 2.25, provides increased control for handling all types of fabrics and for creating desired special effects. Threading is a breeze due to color-coded thread guides and a self-threading lower looper. Simply lay the thread into the guide, flip a switch, and the lower looper is threaded. The guide is automatically returned to its normal position when you turn the balance wheel. And when you lift the presser foot for rethreading, the thread tensions are automatically released so you can draw the thread smoothly. The Janome MyLock 634D also lets you quickly switch to rolled hemming without changing the needle plate. A lower looper pre-tension stitch eliminates the need to change tension for rolled hems.
Lay-in Thread Tension Dial
Threading is a breeze due to color-coded thread guides and an easy lower looper threading system. It has 2 needles and 2, 3 or 4 thread overlock stitching.
Differential Feed Ratio
Easily adjusting the differential feed ratio from a 0.5 to 2.25 with the convenient dials located on the side of the machine.
Easy Rolled Hem Change-Over
The MyLock 634D allows you to quickly switch to rolled hemming without the need of changing your needle plate, thanks to the lower looper pre-tension stitch eliminates the need to change tension for rolled hems.
The Janome MyLock 634D features a 2, 3, or 4 thread overlock, 1,300 Stitches Per Minute, Lay-in thread tension dial, Color coded thread guides, Tension release device, Easily accessible lower looper guides, Changeable thread guide, Quick change rolled hem, Lower looper pretension setting slider, Easily retractable upper knife, Adjustable foot pressure, Snap on presser feet, 1mm to 5mm Adjustable stitch length, 0.5 to 2.25 Differential feed ratio, 3.1mm to 7.3mm Adjustable cutting width,
- Threading Chart
- Waste Chip Box
- Foot Control